Designs in Aluminium - Call Freephone 0800 783 1073
Click here to return to the website Introduction  
   Catalogue Pages
90 Degree Corners for 6, 14/18mm
Anodised Equal & Unequal Angles
Channels & Other Glass Sections
Half Rounds
MirrOtrim
NEW PROFILES incl Slatwall
SecRol
Slotted Uprights 32mm Pitch
Slotted Uprights 30mm pitch
Slotted Uprights 35mm Pitch
Slotted Uprights 50mm Pitch
SLOTTED UPRIGHTS GROUP
Ticket Strips
Trims For 13mm & 18mm Board
About DIAProduct descriptions for the complete DIA rangeOrder Online Now - View BasketClick here for more information about our manufacturing processesDIA Bespoke DesignsClick here to contact DIA now
 


The DisplaYtrim system is very quick and easy to install. By securing the Base Plate (Part No. 5571) into the required location and fixing with the use of screws using the pre-slotted holes. Then just press on the trim of your choice and the job is complete.

When the need for decorating comes along just prise off the trim at one end and the whole section will come away cleanly, the trim can be used again or another design can be put in its place.

Remember if you do not see the shape you like just send us a drawing of what you would like to create and we will see if it can be extruded. The choice of finish whether Powder Coated or Anodised is yours. From your drawing to the finished section should take between 4 to 7 weeks depending on required Finish.

* For product specifications, click on DisplaYtrim in the Catalogue menu on the left.

Click here to email us now